Filter
Top Products
4.3.2.2 Static Settings
Static IP Address
Description Specifies the IP address of the unit.
Note
• This setting is available only when [Connection Mode] is set
to [Static].
Value Range Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0",
"255.255.255.255", "127.0.0.1", etc.)
Default Value Not stored.
Phone User Interface
Reference
Configuring the Network Settings of the Unit (Page 25)
Subnet Mask
Description Specifies the subnet mask of the unit.
Note
• This setting is available only when [Connection Mode] is set
to [Static].
Value Range Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0",
"255.255.255.255", "127.0.0.1", etc.)
Default Value Not stored.
Phone User Interface
Reference
Configuring the Network Settings of the Unit (Page 25)
Default Gateway
Description Specifies the IP address of the default gateway for the network where
the unit is connected.
Note
• This setting is available only when [Connection Mode] is set
to [Static].
Value Range Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0",
"255.255.255.255", "127.0.0.1", etc.)
Default Value Not stored.
Phone User Interface
Reference
Configuring the Network Settings of the Unit (Page 25)
Document Version 2014-05 Administrator Guide 85
4.3.2 IPv4 Network Settings