Filter
Top Products
Feature Description
Compatible
Integration Type
APT DPT
DID Call Routing
*1
The VPS automatically sends calls from preprogrammed
DID numbers to the specified extension, mailbox, or
Custom Service.
—
ü
Remote Call Forwarding
Set
The subscribers and the Message Manager can program
their extensions from a remote location to forward
various types of calls to a desired extension or an outside
telephone.
—
ü
Time Synchronization Whenever the PBX sets a new date and time or when
DPT Integration is established, the data is automatically
registered in the VPS.
—
ü
Timed Reminder Setting
*3
Allows subscribers to set the Timed Reminder feature of
the PBX using voice prompts.
—
ü
VM Menu
*4
Allows subscribers to access subscriber services by
navigating through menus shown on their Digital
Proprietary Telephones (DPTs).
—
ü
*1
DID Call Routing and Toll Saver using DID numbers are only available when the VPS is connected to the following PBXs with DPT
Integration.
• KX-TD500, software production date code 040702 or later
• KX-TDE series
• KX-TDA series (except KX-TDA50), MPR version 1.1 or higher
*2
When an incoming trunk (CO line) call reaches the VPS via the PBX, the VPS will wait about 5 s before answering the call in order
to properly receive the Caller ID information from the PBX. This waiting time is determined by the "Waiting Time for Receiving Caller
ID" setting (see 2.4.3 Parameters in the Programming Manual).
*3
Timed Reminder Setting is only available when the VPS is connected to a KX-TDA series PBX (MPR version 2.0 or higher), KX-TDE,
or KX-TAW series PBX.
*4
VM Menu is only available when the VPS is connected to a KX-TDE series PBX or a KX-TDA series PBX (MPR version 2.0 or higher).
96 Installation Manual Document Version 3.0 2010/06
4.1.3 APT/DPT Integration Features