Filter
Top Products
Mounting on a Concrete or Mortar Wall
CAUTION
When driving the mounting screws into the wall, be careful to avoid touching any metalwork (metal/wire
laths, etc.), conduits, or electrical cables buried in the wall.
1. Place the appropriate wall mounting template (found on the last 2 pages of this manual) on the wall to mark
the locations where the 3 screws need to be placed.
KX-TVA50 KX-TVA200
232 mm
(9-1/8 in.)
120 mm (4-3/4 in.)
250 mm
(9-13/16 in.)
130 mm (5-1/8 in.)
2. Install 3 anchor plugs (user-supplied) in the wall.
Hammer
29 mm
(1-1/8 in.)
Anchor Plug
6.4 mm
(1/4 in.)
3. Install the screws (included) in the wall.
Drive the screw
to this position.
Document Version 3.0 2010/06 Installation Manual 77
2.15.1 Wall Mounting the VPS