Filter
Top Products
3.3 Starting KX-TVA Maintenance Console
The instructions listed below explain how to start KX-TVA Maintenance Console. These instructions are for
when connecting to the VPS via USB.
Note
• The screenshots shown here are for reference only, and may differ from the screens displayed on your
PC.
1. Click the KX-TVA Maintenance Console shortcut icon.
2. Select the appropriate VPS model and click OK.
3. The Enter Programmer Code dialog box is displayed. Enter the installer level programmer code (default:
INSTALLER) and click OK.
Note
• A programmer code is required to use the KX-TVA Maintenance Console. The System
Administrator can change the programmer codes (see 1.9.9 Utility—Programmer Code in the
Programming Manual).
4. The Set Default Parameters window is displayed the first time you start KX-TVA Maintenance Console.
Select the TVA Type, PBX Type, and Integration Mode. Change the default parameters listed in the window
if necessary, then click OK.
Document Version 3.0 2010/06 Installation Manual 89
3.3 Starting KX-TVA Maintenance Console