Panasonic KX-TS620W Answering Machine User Manual


 
Answering System
46
For assistance, please visit http://www.panasonic.com/phonehelp
Erasing Messages
The unit will announce the remaining recording time after playback, if it is less than
3 minutes. New messages cannot be recorded when:
—“Memory full” is heard.
—“Message full” is displayed.
The MESSAGE indicator flashes rapidly (only when the Answering System is
on).
Erase some, or all, of the messages. We recommend you erase unnecessary
messages after each playback.
Erasing a specific message
Press {ERASE} while the message you want to erase is being played.
The unit erases the message.
A short beep will sound and the unit will continue to play the next message.
Erasing all messages
All recorded messages, except the greeting message, can be erased at one time.
1
Press {ERASE}.
•“To erase all messages press ERASE
again” is heard.
2
Within 10 seconds, press
{ERASE} again.
A long beep sounds and “No message
is heard. The display shows “
message”.
The information in the Caller List will not be erased. To erase Caller List information, see
page 30.
MESSAGE Indicator
{ERASE}
TS620bk01.book Page 46 Wednesday, May 24, 2006 2:31 PM