Special Features
42
For assistance, please visit http://www.panasonic.com/phonehelp
Call Restriction
You can prevent the unit from dialing
phone numbers beginning with
specified digit(s) (1 digit or 2 digits).
Phone numbers with the restricted
leading digits cannot be dialed out,
except the emergency numbers stored
in the Direct Dial memory ({M1}, {M2}
or {M3}) or in Phonebook (To store a
number as an emergency number in
phonebook, add
# at the beginning of
the name).
Before using the Call Restriction
feature, we recommend storing
emergency numbers in the memory of
Direct Dial Buttons (p. 36) and
Phonebook (p. 31) as emergency
numbers (#).
To set the call restriction
Make sure that the handset is on the
cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET
indicator light is off.
1
Press {FUNCTION/EDIT}.
2
Scroll to “Program ?” by
pressing {
4} or {3} and
press {OK}
(Yes key).
3
Scroll to “Call restrict ?”
by pressing {
4} or {3}.
4
Press {OK} (Yes key).
If you changed the password
“1111” (default), the below
display will be shown. Follow
the following steps 1 and 2.
1. Enter the password (p. 41).
2. Press {OK} (Next key). Go to
step 5.
• If the wrong password was
entered, 3 beeps will sound.
Enter the correct password.
5
Enter the number(s) (1 digit or 2
digits) you want to restrict ({0} to
{9}).
• If the wrong number was entered,
press {ERASE} and enter the
correct number.
6
Press {OK} (Save key).
• A long beep sounds.
• The display will return to step 3. To
exit the programming mode, press
{EXIT} or wait for 60 seconds.
To cancel the call restriction
Follow steps 1 through 4. In step 5,
press {ERASE} to clear the restricted
digits, and press {OK} (Save key).
Call restrict ?
[OK]=Yes
Restrict No.
:
--
[OK]=Save
When dialing a phone number with the
restricted leading digit(s),
“CALL RESTRICTED” is displayed
.
Enter password
:----
[OK]=Next
Enter password
:
@@@@
[OK]=Next
Restrict No.
[OK]=Save
:
9-
Example: “9” is entered.
TS620bk01.book Page 42 Wednesday, June 7, 2006 2:57 PM