Filter
Top Products
18
Preparing the Answering System
For assistance, please visit http://www.panasonic.com/phonehelp
Programming Summary for the Answering System
You can program the following functions. The display shows the programming
instructions. See the corresponding pages for function details.
Make sure that the handset is on the cradle, the AC adaptor is connected and
the SP-PHONE/HEADSET indicator light is off.
During programming
* To select a desired function item, scroll through the items by pressing {4} or {3}. Then
press {OK}
(Yes key) to go to the next step.
•
“––––––––––––––––” indicates the end of the function menu.
• You can exit the programming mode any time by pressing {EXIT}.
• If you do not press any buttons for 60 seconds, the unit will exit the programming mode.
Press {FUNCTION/EDIT}.
Scroll to “Set answering ?” by pressing {
4} or {3} and press {OK} (Yes key).
<Function menu>*
Remote code ? . . . . . . . . To set the remote code (p. 48).
Number of rings? . . . . . To select the number of rings (p. 19).
Recording time ?. . . . . To select the caller’s recording time (p. 20).
Call screening ?. . . . . To set the call screening feature (p. 20).
––––––––––––––––
TS620bk01.book Page 18 Wednesday, May 24, 2006 2:31 PM