Panasonic KX-TS620W Answering Machine User Manual


 
Direct Dial (M1, M2, M3)
37
For assistance, please visit http://www.panasonic.com/phonehelp
To erase a stored number
1
Press the required Direct Dial
button ({ M1}, {M2} or {M3}).
2
Press {ERASE}.
• To stop erasing, press {3}
(
No key).
3
Press {OK} (Yes key).
• A long beep sounds, the
information is erased, then
Memory Empty” is displayed.
To exit the programming mode, press
{EXIT} or wait for 60 seconds.
When using the Call Restriction feature
(p. 42), you cannot erase a phone number
in the Direct Dial memory ({M1}, {M2} or
{M3}).
If a pause is required for dialing, press
{PAUSE} where needed. If required, you
can also store {FLASH} in a phone
number. Pressing {PAUSE} or {FLASH}
counts as one digit (p. 38, 40).
Dialing a Stored Number
from the Direct Dial
memory
1
Lift the handset or press
{SP-PHONE/HEADSET}.
2
Press the required Direct Dial
button ({M1}, {M2} or {M3}).
• The stored number is displayed
and dialed.
OR
1
Press the required Direct Dial
button ({M1}, {M2} or {M3}).
• The stored number is displayed.
2
Lift the handset or press
{SP-PHONE/HEADSET}.
When you press the Direct Dial buttons
continuously, confirm that the first dialing
out have complete, then press the next
button.
You can dial numbers stored in the Direct
Dial memory ({M1}, {M2} or {M3}) even if
the Call Restriction feature (p. 42) is set.
TS620bk01.book Page 37 Wednesday, May 24, 2006 2:31 PM