Filter
Top Products
Press (STOP).
≥To resume playback, press
(NEW\MESSAGE).
≥If you do not press any button for 60 seconds or if you
press
(STOP) again, the unit will return to the stand-by
mode.
To repeat from the beginning of the message
Press
(REPEAT/REW) briefly.
≥If you press within 5 seconds of playback, the
previous message will be played.
To rewind part of the message
Press and hold
(REPEAT/REW) until you reach the
desired place.
≥At the beginning of the message, 3 short beeps will
sound.
1716
Erasing Messages
1
Press (ERASE).
≥“Press ERASE again to erase all
messages” is heard.
2
Within 5 seconds, press
(ERASE) again.
≥A beep sounds and
“No messages” is heard.
≥The display shows
“0 message”.
≥After the announcement, the
display will return to the
stand-by mode.
The unit will announce the remaining recording time after playback, if it is
less than 5 minutes. New messages cannot be recorded when:
—“Memory full” is heard.
—“Message full” is displayed.
—the ANSWER indicator flashes rapidly.
Erase some, or all, of the messages. We recommend you erase
unnecessary messages after each playback.
Erasing a specific message
Press (ERASE) while the message you want to erase is being played.
≥The unit erases the message.
≥A short beep will sound and the unit will continue to play the next
message.
Erasing all messages
All recorded messages, except the greeting message, can be erased at
one time.
≥The information in the Caller List will not be erased. To erase the Caller
List information, see page 24.
(ERASE)
“ Listening to Messages
During playback
To skip to the next message
Press
(SKIP/FF) briefly.
To cue to part of the message
Press and hold
(SKIP/FF) until you reach the desired
place.
≥The message will be heard at twice the normal speed.
≥At the end of the message, 3 short beeps will sound.
To repeat/
rewind
message
To skip/cue
message
To stop
operation
For Caller ID service users (p. 19)
After listening to new incoming messages, “√” will be added to the call
entries in the Caller ID Caller List (p. 21).
≥During playback, the display shows which message is being played.
(Ex. While the first message is being played back, “Message 1” is
displayed.)
≥At the end of the last message, “End of final message” is heard. The
unit will announce the remaining recording time if it is less than
5 minutes.
≥All recorded messages are saved until you erase them.
PQQX12356ZA-BM 01.3.22 3:56 PM y[W 16