Filter
Top Products
Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp 81
Direct command chart/programming index
Important:
LYou can program each feature directly by using feature codes.
Press {MENU}, {#}, then press the desired feature code.
Note:
LWhen you find “*1”, “*2” and “*3” in the following table, refer to the corresponding note
below.
*1 If you program the following features using one of the units, you do not need to program
the same item using another unit.
*2 If you reset the base unit (page 42), the marked features are reset to their default
settings (base unit only).
*3 If you have not registered your cellular phone and/or headset to the base unit, the
marked features cannot be programmed.
Telephone
Feature Feature
code
Operating
unit
Default setting Page
Auto edit
*2
(Caller ID number auto edit)
{2}{1}{4} Y ^ On 41
Auto talk {2}{0}{0} Y Off 40
Caller list {2}{1}{3} Y ^ –28
Customer support {6}{8}{0} Y ^ –42
Customize ring {1}{6}{6} Y –38
Date and time
*1
{1}{0}{1} Y ^ 12.31.2006 17
Deregistration
(Deregistering a handset)
{1}{3}{1} Y –43
Deregistration
(Deregistering another device)
{1}{3}{4} ^ –43
Display
*2
(Display language)
{1}{1}{0} Y ^ English 16
Registration (Handset
registration)
{1}{3}{0} Y –43
Interrupt tone
*2
{2}{0}{1} Y ^ 2 39
Key tone {1}{6}{5} Y On 40
LCD contrast
*2
(Display contrast)
{1}{4}{5} Y ^ Level 3 40
Message alert {3}{4}{0} Y Off 51
Phonebook {2}{8}{0} Y ^ –22, 25
Ring color {2}{3}{5} Y Color 1 39
TH111(e).book Page 81 Thursday, June 8, 2006 10:35 AM