Filter
Top Products
Programmable Settings
For assistance, please visit http://www.panasonic.com/phonehelp 41
Note:
LIf you subscribe to Caller ID service and
want to view the caller’s information on
the handset display after lifting up the
handset to answer a call, turn off this
feature.
Caller ID number auto edit
Y ^
You can turn the Caller ID number auto
edit feature on or off.
1 {MENU} (center of joystick) i h i
{SELECT}
2 “Caller ID edit” i {SELECT}
3 Select the desired setting. (Default:
“On”) i {SAVE} i {OFF}
1 {MENU} i h i {SET}
2 “Caller ID edit” i {SET}
3 Select the desired setting. (Default:
“On”) i {SET} i {STOP}
Setting telephone line Y ^
Flash time
The flash time depends on your telephone
exchange or host PBX.
LYou only need to program this setting
once, using either the handset or base
unit.
Important:
LThe setting should stay at 700 ms unless
pressing {FLASH} fails to pick up the
Call Waiting call.
1 {MENU} (center of joystick) i h i
{SELECT}
2 “Set tel line” i {SELECT}
3 “Set flash time” i {SELECT}
4 Select the desired setting. (Default:
“700ms”) i {SAVE} i {OFF}
1 {MENU} i h i {SET}
2 “Set tel line” i {SET}
3 “Set flash time” i {SET}
4 Select the desired setting. (Default:
“700ms”) i {SET} i {STOP}
Note for handset and base unit:
LIf the unit is connected via a PBX, certain
PBX functions (call transferring, etc.)
may not work correctly. Consult your
PBX supplier for the correct setting.
Line mode
Generally, the line mode setting should not
be adjusted.
When another phone connected to the
same line is in use, and
–if S is not displayed on the
handset, or
– if the IN USE indicator on the base unit
does not light properly,
you need to change the line mode to “A”.
LYou only need to program this setting
once, using either the handset or base
unit.
1 {MENU} (center of joystick) i h i
{SELECT}
2 “Set tel line” i {SELECT}
3 “Set line mode” i {SELECT}
Handset
Base unit
Handset
Base unit
Handset
TH111(e).book Page 41 Thursday, June 8, 2006 10:35 AM