Filter
Top Products
Useful Information
68 For assistance, please visit http://www.panasonic.com/phonehelp
Troubleshooting
General use
Programmable settings
Problem Cause/solution
The unit does not work. LMake sure that the battery is installed correctly and fully
charged (page 10).
LCheck the connections (page 9).
LUnplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
LThe handset has not been registered to the base unit.
Register the handset (page 43).
I cannot hear a dial tone. LConfirm that the telephone line cord is properly
connected (page 9).
LDisconnect the base unit from the telephone line and
connect a known working telephone. If the working
telephone operates properly, contact our service
personnel to have the unit repaired. If the working
telephone does not operate properly, contact your
telephone service provider.
“Recharge battery” is
displayed and I cannot
perform the following
operations:
– recording or erasing a
customized ringer
– editing a title for a
customized ringer
LThe battery power is low. Fully charge the battery (page
10) and try again.
Problem Cause/solution
I cannot program items. LWhile another user is listening to messages or the
answering system is answering a call, you cannot
program items. Try again later.
While programming, the
handset starts to ring.
LA call is being received. Answer the call and start again
after hanging up.
TH111(e).book Page 68 Thursday, June 8, 2006 10:35 AM