Filter
Top Products
Using a Cellular Phone with this Unit
58 For assistance, please visit http://www.panasonic.com/phonehelp
1 To put the land line call on hold, press
{HOLD}.
2 To make a cellular call
Dial the phone number, then press the
desired CELLULAR SELECT button
({1} to {5}).
To answer a cellular call
Press the CELLULAR SELECT button
({1} to {5}) that is flashing.
LTo hold the cellular call, press
{HOLD}.
3 To return to the land line call, press
{SP-PHONE} to end the cellular call,
then press {SP-PHONE}.
Cellular settings
Important:
LYou must register your cellular phone to
the base unit before programming.
Ringer settings for cellular calls
Y ^
Ringer volume
You can change the ringer volume heard
when a cellular call is received. You can
change it for the handset and base unit
individually.
1 {MENU} (center of joystick) i f
i {SELECT}
2 “Ringer for cell” i {SELECT}
3 “Ringer volume” i {SELECT}
4 Select the desired volume. (Default:
High) i {SAVE} i {OFF}
1 {MENU} i f i {SET}
2 “Ringer for cell” i {SET}
3 “Ringer volume” i {SET}
4 Select the desired volume. (Default:
High) i {SET} i {STOP}
Note for handset and base unit:
LWhen the ringer volume is set to off for a
cellular line, “Ringer off” is not
displayed in standby mode and the
handset or base unit does not ring for
cellular calls.
Base unit
Handset
Base unit
TH111(e).book Page 58 Thursday, June 8, 2006 10:35 AM