Filter
Top Products
C
Making/Answering Calls
18 For assistance, please visit http://www.panasonic.com/phonehelp
Making calls
Using the handset Y
1 Lift the handset and dial the phone
number.
LTo correct a digit, press {CLEAR}.
2 Press {C} or {CALL}.
3 When you finish talking, press {OFF} or
place the handset on the base unit or
charger.
LIf you have registered a cellular
phone to the base unit (page 52),
{CALL} is not displayed.
Using the speakerphone
1 Lift the handset, dial the phone number,
and press {s}.
LSpeak alternately with the other party.
2 When you finish talking, press {OFF} or
place the handset on the base unit or
charger.
Note:
LUse the speakerphone in a quiet
environment.
LTo switch to the receiver, press {C}.
Adjusting the receiver/speaker volume
Push {^} or {V} while talking.
Making a call using the redial list
The last 10 phone numbers dialed are
stored in the redial list.
1 {REDIAL}
2 Push {^} or {V} to select the desired
number.
LTo erase the displayed number, press
{CLEAR}.
3 {C}
PAUSE button (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long distance
service. When storing a calling card
access number and/or PIN in the
phonebook, a pause is also needed (page
24).
For example, if you need to dial the line
access number “9” when making outside
calls with a PBX:
1 {9} i {PAUSE} i Dial the phone
number.
2 {C}
Note:
LA 3.5 second pause is inserted each
time {PAUSE} is pressed. Press
repeatedly to insert longer pauses.
TH111(e).book Page 18 Thursday, June 8, 2006 10:35 AM