Filter
Top Products
Programmable Settings
42 For assistance, please visit http://www.panasonic.com/phonehelp
4 Select the desired setting. (Default: “B”)
i {SAVE} i {OFF}
1 {MENU} i h i {SET}
2 “Set tel line” i {SET}
3 “Set line mode” i {SET}
4 Select the desired setting. (Default: “B”)
i {SET} i {STOP}
Changing the PIN (personal
identification number) ^
For security, the PIN must be entered
when changing certain settings such as
registering units. The default setting is
“7262”.
Important:
LIf you change the PIN, please make note
of your new PIN. The unit does not
reveal the PIN to you.
1 {MENU} i h i {SET}
2 “Set PIN” i {SET}
3 To change the PIN for the first time, skip
to step 4.
To change the PIN, enter the current 4-
digit PIN. i {SET}
4 Enter the new 4-digit PIN. i {SET}
5 Enter the new 4-digit PIN again. i
{SET} i {STOP}
If you forget the PIN (resetting the base
unit to its default settings)
If you set the PIN and you cannot
remember it, you can reset the base unit
using the following procedures.
Base unit:
{MENU} i {MUTE} i
{#}{9}{0}{0}{0}
Note:
LThe following items are reset to their
default settings:
– Settings indicated by “*2” in the
feature column on page 81
– Answering system: On
LIf you have registered a cellular phone,
the following cellular phone settings are
also reset to their default settings.
–“Assign Base/HS” (Allows you to
select which unit to ring for cellular
calls, page 59): “All”
–“TAD (cell)” (Answering system for
cellular phone, page 59): “Off”
–“TAD ring count” (Ring count of
answering system for cellular phone,
page 60): “4 rings”
Customer support Y ^
The handset and base unit can display the
Internet address where you can download
the operating instructions or get further
information for this product using your
computer.
1 {MENU} (center of joystick) i h i
{SELECT}
2 “Customer support” i {SELECT}
LThe Internet address is displayed.
3 {OFF}
1 {MENU} i h i {SET}
2 “Customer support” i {SET}
LThe Internet address is displayed.
3 {STOP}
Base unit
Handset
Base unit
TH111(e).book Page 42 Thursday, June 8, 2006 10:35 AM