Filter
Top Products
the phonebook, a pause is also needed
(
page 25).
Example: If you need to dial the line access
number “9” when making outside calls with a PBX:
Base unit / Handset
1 9 a MP
AUSEN
2 Dial the phone number.
3 Proceed with the operation for your unit.
Base unit: Lift the corded handset.
Handset: M
N
N
ote:
R A 3.5 second pause is inserted each time
MPAUSEN is pressed. Repeat as needed to
create longer pauses.
Answering calls
Using the base unit
When a call is being received, the LINE 1 indicator
a
nd/or LINE 2 indicator on the base unit flashes
rapidly.
1 Lift the corded handset or press M
N
when the
unit rings.
R The called line is automatically selected. To
change the line selection mode, see
page 14.
R You can also answer the call by pressing
MLINE 1N or MLINE 2N.
2 When you finish talking, place the corded
handset on the cradle. When the
speakerphone is used, press M
N.
Using the handset
When a call is being received, the ringer indicator
a
nd
and/or flashes rapidly.
1 L
ift the handset and press M
N or M N when
the unit rings.
R The called line is automatically selected. To
change the line selection mode, see
page 14.
R You can also answer the call by pressing
MLINE 1N or MLINE 2N.
R You can also answer the call by pressing
any dial key from 0 to 9, *, or #. (Any
key answer feature)
2 W
hen you finish talking, press MOFFN or place
the handset on the charger.
Auto talk
Y
ou can answer calls simply by lifting the handset
off the charger. You do not need to press M
N.
T
o turn this feature on, see page 28.
Adjusting the ringer volume
Base unit / Handset
n W
hile the unit is ringing for an incoming call:
Press MDN or MCN repeatedly to select the
desired volume.
n Programming the volume beforehand:
1 MMENUN#160
2 MbN: Select the desired line. a MSELECTN
3 MbN: Select the desired volume. a MSAVEN
4 Proceed with the operation for your unit.
Base unit: MnN (EXIT)
Handset: MOFFN
Temporary ringer off
Base unit / Handset
W
hile the unit is ringing for a call, you can turn the
ringer off temporarily by pressing M
N
on the base
unit or MOFFN on the handset.
Useful features during a call
Hold
T
his feature allows you to put an outside call on
hold.
Base unit
1 P
ress MHOLDN during an outside call.
R If you are using the corded handset, you
can place it on the cradle.
2 To release hold, press MLINE 1N or MLINE 2N
that is flashing on the base unit.
Handset
1 P
ress MHOLDN 2 times during an outside call.
16
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls