Filter
Top Products
Useful Information
43
Caller ID
Problem Cause/solution
Caller information is not
displayed.
L You must subscribe to a Caller ID service.
Contact your service provider/telephone
company for details.
L If your unit is connected to any additional
telephone equipment, remove and plug the
unit directly into the wall socket.
L If you use a DSL/ADSL (JetStream) service,
we recommend that you contact your
DSL/ADSL service provider to have a
DSL/ADSL Splitter installed. We do not
recommend the use of generic DSL/ADSL
filters. Contact your DSL/ADSL service
provider for details.
L Other telephone equipment such as a
monitored Burglar Alarm or the modem in the
SKY Digital decoder may be interfering with
this unit. Disconnect the other equipment and
try again.
Caller information is slow to
display.
L Depending on your service provider/
telephone company, the unit may display the
caller’s information at 2nd ring or later.
L Move closer to the base unit.
Time on the unit has shifted. L Incorrect time information from incoming
Caller ID changes the time. Set the time
adjustment to off (page 25).