Filter
Top Products
Programming
28
Incoming call barring (Caller
ID subscribers only)
This feature allows the unit to reject calls
from specified phone numbers that you
do not want to answer such as junk calls.
You can store up to 20 phone numbers in
the bar call list by using the caller list or
by entering the numbers directly.
When a call is received, the unit does not
ring while the caller is being identified. If
the phone number matches an entry in
the bar call list, the unit sends out a busy
tone to the caller, then disconnects the
call.
Important:
L You must store the phone number
with an area code in the bar call list.
L When the unit receives a call from a
number that is stored in the bar call
list, the call is disconnected and the
number is logged in the caller list
(page 32) with 7.
Storing unwanted callers from the
caller list
1 K (centre of joystick) iji
M
2 {V}/{^}: Select the item to be
barred. i K
3 {V}/{^}: “Add Bar List” i M
4 {ih}
Storing unwanted callers by entering
phone numbers
1 K (centre of joystick) i # i
M i ~
2 Enter the phone number (24 digits
max.). i M
L To erase a digit, press {C/T}.
3 {ih}
Viewing/editing/erasing bar call
numbers
1 K (centre of joystick) i # i
M
2 {V}/{^}: Select the desired item.
i K
L To exit, press {ih}.
3 Proceed with the desired operation.
■ Editing a number:
{V}/{^}: “Edit” i M i
Use the joystick to move the
cursor. i Edit the number. i
M i {ih}
■ Erasing a number:
{V}/{^}: “Erase” i M i
{V}/{^}: “Yes” i M i
{ih}
Note:
L When editing, press the desired dial
key to add, {C/T} to erase.
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to a
single base unit.
Important:
L The additional handset model
recommended for use with this unit is
noted on page 4. If another handset
model is used, certain operations
(handset settings, base unit settings,
etc.) may not be available.
Additional base units
Handsets can be registered to up to 4
base units, allowing you to add
additional base units and extend the
area in which your handset(s) can be