Filter
Top Products
Programming
27
6 {ih}
Selecting area codes to be
deleted automatically
In some situations, phone numbers
stored automatically in the caller list
(page 32) will include area codes. If you
do not want to dial the area codes when
making calls from the caller list, you can
store the area codes which you want the
unit to delete automatically.
Example: You have stored the area
code “09”. If you make a call from the
caller list to the phone number “09-456-
7890”, the unit dials “456-7890”.
1 K (centre of joystick) i ! i
M
2 {V}/{^}: “Area Code” i M
3 Enter an area code (5 digits max.).
i M i {ih }
Note:
L The use of this feature can prevent a
National Call from being dialled. E.g.,
in the case of the South Island, the
“03” will be omitted and will therefore
prevent a National Call to other areas
of the South Island.
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign
up to 6 phone numbers to be restricted,
and select which handsets are to be
restricted. Storing area codes here
prevents the restricted handsets from
dialling any phone number in that area
code.
1 K (centre of joystick) i ! i
M
2 {V}/{^}: “Call Restrict” i
M
3 Enter the base unit PIN (default:
“0000”).
L If you forget your PIN, contact
your nearest Panasonic service
centre.
4 Set which handsets to be restricted
by pressing the desired handset
number.
L All the registered handset
numbers are displayed.
L Flashing numbers indicate call
restriction is turned on for the
corresponding handset.
L To turn call restriction off for a
handset, press the number again.
The number stops flashing.
5 M
6 {V}/{^}: Select a memory location.
i M
7 Enter the phone number or area
code to be restricted (8 digits max.).
i M i {ih}
L To erase a restricted number,
press {C/T}.
Changing the base unit PIN
(Personal Identification
Number)
Important:
L If you change the PIN, please make
note of your new PIN. The unit will not
reveal the PIN to you. If you forget
your PIN, contact your nearest
Panasonic service centre.
1 K (centre of joystick) i ! i
M
2 {V}/{^}: “Base Unit PIN” i
M
3 Enter the current 4-digit base unit
PIN (default: “0000”).
4 Enter the new 4-digit base unit PIN.
i M i {ih}