Filter
Top Products
Making/Answering Calls
16
Making calls
1 Lift the handset and dial the phone
number.
L To correct a digit, press {C/T}.
2 {C}
3 When you finish talking, press
{ih} or place the handset on the
base unit or charger.
Using the speakerphone
1 Dial the phone number, and press
{s}.
L Speak alternately with the other
party.
2 When you finish talking, press
{ih}.
Note:
L For best performance, use the
speakerphone in a quiet environment.
L To switch back to the receiver, press
{C}.
Adjusting the receiver or speaker
volume
Push the joystick up or down repeatedly
while talking.
Making a call using the redial list
The last 10 phone numbers dialled are
stored in the redial list (each 24 digits
max.).
1 j (right soft key)
2 {V}/{^}: Select the desired phone
number.
3 {C} / {s}
L If {s} is pressed and the other
party’s line is engaged, the unit
automatically redials multiple
times. While the handset is
waiting to redial, the ringer
indicator flashes. To cancel,
press {ih}.
Editing/erasing/storing
1 j (right soft key)
2 {V}/{^}: Select the desired phone
number. i K
3 Proceed with the desired operation.
■ Editing a number before
calling:
{V}/{^}: “Edit and Call” i
M i Use the joystick to move
the cursor. i Edit the number.
i {C }
■ Erasing a number:
{V}/{^}: Select “Erase” or
“Erase All”. i M i
{V}/{^}: “Yes” i M i
{ih}
■ Storing a number to the
phonebook:
{V}/{^}: “Add Phonebook” i
M i To store the name,
continue from step 3, “Adding
entries”, page 19.
Note:
L When editing:
– To erase a number, place the cursor
on the number, then press {C/T}.
– To insert a number, place the cursor
to the right of where you want to
insert the number, then press the
appropriate dial key.
Pause (for PBX/long distance service
users)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed
(page 21).