Filter
Top Products
Programming
26
3 {V}/{^}: “Time Adjustment” i
M
4 {V}/{^}: Select “Caller
ID[Auto]” or “Manual”. i M
i {ih}
Night mode
Night mode allows you to select a period
of time during which the handset will not
ring for outside calls. This feature is
useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Night mode can be set for each
handset.
Using the phonebook’s category feature
(page 19), you can also select
categories of callers whose calls
override night mode and ring the
handset (Caller ID subscribers only).
Important:
L Set the date and time beforehand
(page 15).
L If you have set the alarm, the alarm
sounds even if the night mode is
turned on.
Setting the start and end time
1 K (centre of joystick) i N i
M
2 {V}/{^}: “Ringer Setup” i M
3 {V}/{^}: “Night Mode” i M
4 {V}/{^}: “Start/End” i M
5 Enter the desired hour and minute
you wish to start this feature.
6 Enter the desired hour and minute
you wish to end this feature.
7 M i {ih}
Note:
L To correct a digit, use the joystick to
move the cursor to the digit, then
make the correction.
Turning night mode on/off
1 K (centre of joystick) i N i
M
2 {V}/{^}: “Ringer Setup” i M
3 {V}/{^}: “Night Mode” i M
4 {V}/{^}: “On/Off” i M
5 {V}/{^}: Select the desired setting.
i M i {ih }
L When the night mode is set, f is
displayed.
Setting the ring delay
This setting allows the handset to ring
during night mode if the caller waits long
enough. After the selected amount of
time passes, the handset rings. If you
select “No Ringing”, the handset
never rings during night mode.
1 K (centre of joystick) i N i
M
2 {V}/{^}: “Ringer Setup” i M
3 {V}/{^}: “Night Mode” i M
4 {V}/{^}: “Ring Delay” i M
5 {V}/{^}: Select the desired setting.
i M i {ih }
Selecting categories to bypass night
mode
1 K (centre of joystick) i N i
M
2 {V}/{^}: “Ringer Setup” i M
3 {V}/{^}: “Night Mode” i M
4 {V}/{^}: “Select Category” i
M
5 Press the desired category
numbers. i M
L The selected category number
flashes.
L To cancel a selected category
number, press the number again.
The number stops flashing.