Filter
Top Products
Answering System
39
Erasing all messages
Press {4} 2 times while the unit is not in
use.
Listening to messages
using the handset
When new messages have been
recorded, u is displayed on the
handset with the total number of new
messages.
1 To listen to new messages:
1 i {#}{3}{2}{3}
To listen to all messages:
1 i {#}{3}{2}{4}
2 When finished, press {ic}.
Note:
L To switch to the receiver, press {C}.
L If “Messages Full” is shown on the
display, u and the total number of
new messages are not displayed.
Listening to messages from
the message list
You can select the item to play back.
1 1 i {#}{3}{2}{9}
2 {V}/{^}: Select the desired item from
the message list. i 0
L You can erase the selected
message as follows:
W i {V}/{^}: “Yes” i M
3 When finished, press {ic}.
Note:
L If the item has already been heard,
“Q” is displayed.
L “Message” is displayed in the
message list for any recorded
conversations or if the unit cannot
receive caller information.
Operating the answering
system
1 i D i M
*1 If pressed within the first 5 seconds of
a message, the previous message is
played except when playing back
from the message list.
*2 When you play a message from the
message list, the unit stops message
Key Operation
{^} or {V} Adjust the receiver or
speaker volume
(during playback)
{1} or {<} Repeat message
(during playback)
*1
{2} or {>} Skip message
(during playback)
*2
{3} Enter the
“Settings” menu
{4} Play new messages
{5} Play all messages
{6} Play greeting
message
{7}{6} Record greeting
message
{8} Turn answering
system on
1 Pause message
*3
{9} or O Stop recording
Stop playback
{0} Turn answering
system off
{*}{4}
*4
Erase currently
playing message
{*}{5} Erase all messages
{*}{6} Reset to a pre-
recorded greeting
message
TG7511_7521BX(e).book Page 39 Tuesday, June 15, 2010 2:10 PM