Filter
Top Products
Programming
23
*1 KX-TG7521
*2 For models with 2 or more handsets included.
Programming using the direct commands
1
1 i {#}
2 Enter the desired code.
3 Select the desired setting. i M
L This step may vary depending on the feature being programmed.
L To exit the operation, press {ic}.
Note:
L In the following table, < > indicates the default settings.
Initial Setup
"
Keytones ––
Area Code –28
Auto Talk –17
Line Setup Dial Mode 13
Recall/Flash 17
Privacy Mode
*2
––
Base Unit PIN –29
Repeater Mode –31
Register Register H.set 30
Select Base –30
Language Display 13
Feature Code Setting Page
Caller List {2}{1}{3} –33
Intercom
*1
{2}{7}{4} ––
Set Date/Time {1}{0}{1} –13
Alarm {7}{2}{0}{1}: Once {2}: Daily
{0}: <Off>
27
Time Adjustment
*2
{2}{2}{6}{1}: Caller ID
{0}: <Manual>
–
Ringer Volume
*3
(Handset)
{1}{6}{0}{1}–{6}: Level 1–6 <6>
{0}: Off
–
Ringer Volume
*4
(Base unit)
{*}{1}
{6}{0}
{1}–{6}: Level 1–6 <3>
{0}: Off
–
Ringtone
*5,
*6
(Handset)
{1}{6}{1} <Ringtone 1>–
Night Mode
(On/Off)
{2}{3}{8}{1}: On {0}: <Off>27
Main menu Sub-menu 1 Sub-menu 2 Page
TG7511_7521BX(e).book Page 23 Tuesday, June 15, 2010 2:10 PM