Filter
Top Products
Useful Information
71
For assistance, please visit http://www.panasonic.com/help
Bluetooth PIN
Liquid damage
Caution:
L To avoid permanent damage, do not use a microwave oven to speed up the drying
process.
I cannot operate the
answering system
remotely.
L The remote access code is not set. Set the remote
access code (page 53).
L You are entering the wrong remote access code. If
you have forgotten your remote access code,
enter the remote access code setting to check
your current code (page 53).
L Press each key firmly.
L The answering system is turned off. Turn it on
(page 54).
L You cannot operate the answering system when
calling a cellular phone registered to the base unit.
Problem Cause/solution
I cannot remember the
PIN.
L Change the PIN using the following method.
1 {MENU} i {#}{6}{1}{9}
2 {*}{7}{0}{0}{0}
3 Enter the new 4-digit PIN. i {OK}
4 Enter the new 4-digit PIN again. i {SAVE}
i {OFF}
Problem Cause/solution
Liquid or other form of
moisture has entered the
handset/base unit.
L Disconnect the AC adaptor and telephone line
cord from the base unit. Remove the batteries
from the handset and leave to dry for at least 3
days. After the handset/base unit are completely
dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before
use. If the unit does not work properly, contact an
authorized service center.
Problem Cause/solution
TG658x(e).book Page 71 Friday, February 26, 2010 7:50 AM