Filter
Top Products
Link to Cell
17
For assistance, please visit http://www.panasonic.com/help
phone’s ringer tone when a cellular
call is being received if:
– your cellular phone is in silent
mode. (depending on your cellular
phone)
– the base unit or 2 or more handsets
are on a landline call or an intercom
call.
L If your cellular phone is in silent mode
with “On (with Talking CID)”
set, the unit announces caller
information even when Talking Caller
ID is turned off (page 35).
To use the handset ringer tone
instead of your cellular phone’s
ringer tone
Select “Off” in step 3, “Ring as cell
mode”, page 16.
To change the handset ringer tone for a
cellular line, see page 36.
Auto connection to the
cellular phone
After registration, your cellular phone is
connected to the base unit. If you move
the cellular phone out of base unit range,
the cellular phone is disconnected from
the base unit. This feature allows the
base unit to try to reconnect the cellular
phone at regular intervals when it returns
within base unit range. You can set the
interval. The default setting is “1 min”.
Important:
L When you are using a cellular line or a
Bluetooth headset, the base unit loses
its connection from other Bluetooth
devices (cellular phone or headset).
To automatically resume the
connection to cellular phones, leave
the auto connection on.
L Some cellular phones lose connection
after usage, please check the
specification of your cellular phone for
more details.
1 {MENU} i {#}{6}{3}{2}
2 {V}/{^}: Select the desired setting.
3 {SAVE} i {OFF}
Note:
L Some cellular phone may ask you if
you accept the connection
requirement from the base unit. In that
case, select “Off” in step 2. Check
the specification of your cellular
phone.
Connecting/disconnecting the
cellular phone manually
When you make or answer calls with
your cellular phone, we recommend
disconnecting it from the base unit,
otherwise received audio may not be
heard on your cellular phone.
You can also manually reconnect the
cellular phone to the base unit without
waiting for the auto connection feature to
resume the connection.
1 {MENU}
2 To connect/disconnect:
For CELL 1: {#}{6}{2}{5}{1}
For CELL 2: {#}{6}{2}{5}{2}
L A long beep sounds.
3 {OFF}
Cellular line only mode (If you
do not use the landline)
If you do not use the landline, we
recommend setting the unit to the
cellular line only mode.
1 {MENU} i {#}{1}{5}{7}
2 To turn on:
{V}/{^}: “On” i {SELECT} i
{V}/{^}: “Yes” i {SELECT}
To turn off:
{V}/{^}: “Off” i {SELECT}
TG658x(e).book Page 17 Friday, February 26, 2010 7:50 AM