Filter
Top Products
Useful Information
70
For assistance, please visit http://www.panasonic.com/help
Answering system
An error tone is heard
when I try to program the
Bluetooth feature.
L The bluetooth feature cannot be accessed
immediately after connecting the AC adaptor to
the base unit. Wait a few seconds and try again.
L The headset has not connected to the base unit
yet, even though you performed the connecting
procedure setting. Wait a few seconds and try
again.
Problem Cause/solution
The unit does not record
new messages.
L The answering system is turned off. Turn it on
(page 50).
L The answering system does not answer or record
calls from cellular lines.
L The message memory is full. Erase unnecessary
messages (page 52).
L The recording time is set to “Greeting only”.
Change the setting (page 55).
L If you subscribe to a voice mail service, messages
are recorded by your service provider/telephone
company, not your telephone. Change the unit’s
number of rings setting or contact your service
provider/telephone company (page 55).
L The answering system will not answer incoming
calls while:
– the base unit or 2 or more handsets are on a
cellular call or an intercom call.
– a headset is in use.
Caller information is recorded in the caller list.
I cannot operate the
answering system.
L Someone is using the unit. Wait for the other user
to finish.
L A caller is leaving a message. Wait for the caller to
finish.
L The handset is too far from the base unit. Move
closer.
Problem Cause/solution
TG658x(e).book Page 70 Friday, February 26, 2010 7:50 AM