Filter
Top Products
Making/Answering Calls Using the Base Unit
27
For assistance, please visit http://www.panasonic.com/help
Temporary tone dialing for
landline calls (for rotary/pulse
service users)
You can temporarily switch the dialing
mode to tone when you need to access
touch-tone services (for example,
answering services, telephone banking
services, etc.).
Press {*} (TONE) before entering
access numbers which require tone
dialing.
Call share
This feature allows you to join an
existing outside call.
Important:
L When the privacy mode is on, you
cannot join the conversation. Turn it
off (page 23).
To select the line that is being used for
the call:
– for a cellular line press {CELL 1} or
{CELL 2}.
– for the landline press {SP-PHONE}.
Note:
L A maximum of 3 parties (including 1
outside party) can join a conversation
using 2 extensions. (3-way
conference)
Transferring a cellular call
between the base unit and a
cellular phone
Transferring a cellular call from the
base unit to a cellular phone
During a cellular call, press and hold
{CELL 1} or {CELL 2} until the SP-
PHONE indicator goes out.
L The cellular call is transferred to the
cellular phone.
Transferring a cellular call from a
cellular phone to the base unit
During a conversation using a cellular
phone, press {CELL 1} or {CELL 2}.
L The cellular call is transferred to the
base unit.
Using the other line during a
conversation
You can handle a cellular call and a
landline call at the same time. When
another call is being received during a
conversation, the interrupt tone sounds
(page 35). You can answer the 2nd call
while holding the 1st call.
Making/answering a cellular call
during a conversation on the landline
1 Press {HOLD} during a landline
call.
2 To make a 2nd call:
Press {CELL 1} or {CELL 2}. i
Dial the phone number.
*1
i Press
{CELL 1} or {CELL 2} again or wait
for 5 seconds.
*1 Dial the next digit within 5
seconds, otherwise the unit starts
dialing.
To answer a 2nd call:
Press {CELL 1} or {CELL 2}.
L To hold the 2nd call, press
{HOLD}.
3 To hang up the 2nd call and return to
the 1st call (landline call), press
{SP-PHONE} 2 times.
TG658x(e).book Page 27 Friday, February 26, 2010 7:50 AM