Filter
Top Products
Making/Answering Calls Using the Handset
20
For assistance, please visit http://www.panasonic.com/help
Making cellular calls
Important:
L Only 1 cellular line can be used at a
time.
L Before making calls, confirm that the
CELL 1 or CELL 2 indicator lights
green (page 12).
1 Lift the handset and dial the phone
number.
L To correct a digit, press {CLEAR}.
2 {CELL}
L The unit starts dialing when:
– only 1 cellular phone is
registered.
– a specific line is set to make
cellular calls (page 18).
Go to step 4.
3 {V}/{^}: Select the desired cellular
phone. i {SELECT}
4 When you finish talking, press
{OFF} or place the handset on the
base unit or charger.
Note:
L To switch to the speaker, press {s}.
To switch back to the receiver, press
{C}.
Adjusting the receiver or speaker
volume
Press {^} or {V} repeatedly while
talking.
Making a cellular call using the redial
list
The last 5 phone numbers dialed are
stored in the redial list (each 48 digits
max.).
1 {>} REDIAL
2 {V}/{^}: Select the desired phone
number.
3 {CELL}
L The unit starts dialing when:
– only 1 cellular phone is
registered.
– a specific line is set to make
cellular calls (page 18).
4 {V}/{^}: Select the desired cellular
phone. i {SELECT}
Erasing a number in the redial list
1 {>} REDIAL
2 {V}/{^}: Select the desired phone
number. i {ERASE}
3 {V}/{^}: “Yes” i {SELECT}
4 {OFF}
Making landline calls
1 Lift the handset and dial the phone
number.
L To correct a digit, press {CLEAR}.
2 {C}
3 When you finish talking, press
{OFF} or place the handset on the
base unit or charger.
Using the speakerphone
1 Dial the phone number and press
{s}.
L Speak alternately with the other
party.
2 When you finish talking, press
{OFF}.
Note:
L For best performance, use the
speakerphone in a quiet environment.
L To switch back to the receiver, press
{C}.
TG658x(e).book Page 20 Friday, February 26, 2010 7:50 AM