Filter
Top Products
Useful Information
For assistance, please visit http://www.panasonic.com/consumersupport 61
Phonebook
Caller ID
Problem Cause & solution
I cannot store an item in
the phonebook.
LYou cannot store an item in th e phonebook while the
handset is in talk, speakerphone or intercom mode, or
while listening to messages.
LDo not pause for over 1 minute wh ile sto ring .
While storing an item in
the phonebook, the
handset starts to ring.
LA call is being received. Answer the call and start again
from the beginning after hanging up.
The display exits the
phonebook while
searching.
LThe handset automatically exits after 1 minute of
inactivity.
Problem Cause & solution
The handset does not
display the caller’s name
and/or phone nu mber.
LYou have not subscribed to Caller ID service. Contact
your telephone company to subscribe.
LIf your unit is connected to any additi onal telephone
equipment such as a Caller ID box or wireless
telephone jack, disconnect the unit from the equipment
and plug the unit directly into the wall jack.
LIf your unit is connected to a telephone li ne with DSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your DSL provider for details.
LThe name display service may not be available in some
areas. Contact your telephone company for details.
LOther telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
LThe call er requested not to send caller information
(page 26).
LGenerally caller information is displayed from the 2nd
ring.
The handset or base unit
does not announce the
displayed caller names.
LThe handset or base unit’s ringer volume is turned off.
Adjust it (page 36, 42).
LThe Talking Caller ID feature is turned off. Turn it on
(page 40, 43).
LCa ller names will usually be announced after the 2nd
ring.
LThe ring count for the answering system is set to “2” or
“Toll saver”. Select a different setting (page 52).