Filter
Top Products
Preparation
18 For assistance, please visit http://www.panasonic.com/consumersupport
Setting the unit before
use
Setting the dialing mode
If you cannot make calls, change this
setting depending on your telephon e line
service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary pulse dial service.
1 Press {MENU} (middle soft key).
2 Scroll to N, then press {SELECT}.
3 Scroll to “Set tel line”, then press
{SELECT}.
4 Scroll to “Set dial mode”, then press
{SELECT}.
5 Press {V} or {^} repeatedly to select
the desired setting.
6 Press {SAVE}, then press {OFF}.
Setting the date and time O
1 Press {MENU} (middle soft key).
2 Scroll to O, then press {SELECT}.
3 Scroll to “Date and time”, then press
{SELECT}.
4 Enter the current month, day, and year
by selecting 2 digits for each.
Example: June 15, 2005
Press {0}{6}{1}{5}{0}{5}.
5 Enter the current hour and minute (12-
hour clock format) by selecting 2 digits
for each.
Example: 9:30 PM
Press {0}{9}{3}{0}.
6 Select “AM” or “PM” by pressing {AM/
PM}.
7 Press {SAVE}.
LWhen the date and time are set, E
disappears from the base unit
display.
LIf the handset beeps 3 times, the date
and time were not set correctly. Enter
the correct digits.
8 Press {OFF}.
Note:
LIf you make a mistake when entering the
date and time, press {V}, {^}, {<}, or
{>} to move the cursor , then make the
correction.
Time adjustment (Caller ID subscribers
only)
When calls are received, Caller ID will
automatically adjust the date and time
(including daylight saving time).
LIf you have not set the date and time
manually, Caller ID will not adjust the
date and time.
LYou can turn this feature off (page 44).
Date and time
Time adjustment
Date:06.15.2005
Time:12:00 AM
0-9=Date&Time