Filter
Top Products
Making/Answering Calls
For assistance, please visit http://www.panasonic.com/consumersupport 21
Useful features during a
call
HOLD button
This feature allows you to put an outside
call on hold.
Press {HOLD} during an outside call.
L“Hold” will be displayed.
LTo return to the call, press {C} or {s}.
Note:
LIf another phone is connected on the
same line (page 9), you can also take
the call by lifting its handset.
LIf a call is kept on hold for more than 6
minutes, an alarm tone will start to
sound and the ringer indicator will flash
rapidly. After 4 additional minutes on
hold, the call will be disconnected.
MUTE button
You can mute your voice during a
conversation. While mute is turned on you
will be able to hear the other party, but the
other party will not be able to hear you.
To mute your voice, press {MUTE}.
L“<Mute>” will flash on the display.
LTo return to the conversation, press
{MUTE}, {C}, or {s}.
Voice enhancer
This feature clarifies the voice of the
person you are talking to, reproducing a
more natural-sounding voice that is easier
to hear and understand.
1 Press {MENU} (middle soft key) during
an outside call.
2 To turn this feature on or off, press {3}.
LY ou can also turn this feature on or off
by pressing {V} or {^} then pressing
{SELECT}.
LWhen turned on, W will be
displayed.
Note:
LOnce you turn voice enhancer on, it will
be activated for all outside calls until
turned off.
LY ou can also turn this feature on or off by
programming (page 39).
LD epending on the condition and quality
of your telephone line, this feature ma y
emphasize existing line noise. If it
becomes difficult to hear, turn this
feature off.
Clarity booster
This feature can improve sound clarity
when the handset is used in an area where
there may be interference. During an
outside call, this feature will be turned on
automatically when necessary. This
feature will turn off when you hang up or
put a call on hold. It will not turn off
automatically during a call. You can also
turn this feature on or off manually.
1 Press {MENU} (middle soft key) during
an outside call.
2 To turn this feature on or off, press {2}.
LY ou can also turn this feature on or off
by pressing {V} or {^} then pressing
{SELECT}.
LWhile this feature is turned on,
“Booster on” will flash on the
display.
Note:
LIf this feature is turned off manually
during a call, it will not be turned on
automatically during the same call.
LWhile this feature is turned on, battery
operating time will be shortened (page
12).