Filter
Top Products
Programming
30
*1 KX-TG3721/KX-TG3821 series: page 3, 4
*2 If you program these settings using one of the handsets, you do not need to program the same
item using another handset. (KX-TG3712/KX-TG3722/KX-TG3822)
*3 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*4 If the Caller ID time and date display service is available in your area, this feature allows the
unit to automatically adjust the date and time each time caller information including date and
time is received.
To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”. (Caller
ID subscribers only) To use this feature, set the date and time first (page 17).
*5 KX-TG3712, KX-TG3722, KX-TG3811/KX-TG3821 series (page 4)
*6 Ringer volume cannot be turned off for alarm, intercom calls, and paging.
*7 KX-TG3721 series: page 3
*8 If you select one of the melody ringer tones, the ringer tone continues to play for several
seconds even if the caller has already hung up. You may either hear a dial tone or no one on
the line when you answer the call.
*9 The preset melodies in this product are used with permission of © 2011 Copyrights Vision Inc.
*10KX-TG3811/KX-TG3821 series base unit
You can adjust the contrast of the base unit display by performing the following operation.
{DISPLAY} s {r}: “Contrast” s {4} s {r}: Select the desired setting. s {4}
*11Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any
keys, including confirmation tones and error tones.
*12KX-TG3711BX/KX-TG3712BX/KX-TG3719BX/KX-TG3721BX/KX-TG3722BX/
KX-TG3811BX/KX-TG3821BX/KX-TG3811JX/KX-TG3821JX/KX-TG3822JX
*13If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
Line Setup Dial Mode
*2
1: Pulse
2: <Tone>
#120 17
Flash Time
*2,
*14
0: 900 msec.
1: <700 msec.>
2: 600 msec.
3: 400 msec.
4: 300 msec.
5: 250 msec.
*: 200 msec.
#: 160 msec.
6: 110 msec.
7: 100 msec.
8: 90 msec.
9: 80 msec.
#121 20
Privacy Mode
*2,
*5,
*15
– 1: On 0: <Off> #194 –
Register Register H.set – #130 54
Cancel Register
*3
– #131 54
Power Failure – 1: <Auto> 0: Off #152 22
Language
*12
– 1: <English>
2:
3:
#110 17
Sub-menu 1 Sub-menu 2 Setting Code +
TG37xx38xxBX(e).book Page 30 Wednesday, June 8, 2011 2:08 PM