Filter
Top Products
Preparation
8
*1 Voice mail subscribers only
Symbols used in these operating
instructions
Display language
1 {j/OK}
2 {v}/{e}: “SETTING HS” i {>}
3 {v}/{e}: “DISPLAY OPT” i {>}
4 {v}/{e}: “LANGUAGE” i {>}
5 {v}/{e}: Select your desired language. i {>} i {ih}
Note:
L If you select a language you cannot read: {ih} i {j/OK} i {v}
i {>} i {v} 3 times i {>} i {v} 2 times i {>} i
{v}/{e}: Select your desired language. i {>} i {ih}
Call bar is on. (page 13)
Direct call is on. (page 13)
Key lock is on. (page 10)
Ringer volume is off. (page 12)
Displayed when you press {#}.
If “BS NO” is selected for standby mode display
(page 13) and the current base unit number is 1, “-1-”
is displayed.
If “HS NO” is selected for standby mode display
(page 13) and the current handset number is 2, “[2]”
is displayed.
4 new calls
When new calls have been received, the display shows the number of
new calls.
Item Meaning
Symbol Meaning
{j/OK} Press {j/OK}.
i Proceed to the next operation.
{v}/{e}: “ ” Press {v} or {e} to select the words in
quotations.
Example: {v}/{e}: “OFF”
TG1311_1312_1313BX(e).book Page 8 Tuesday, September 2, 2008 10:36 AM