Filter
Top Products
Useful Information
21
L If you forget your PIN, see page 21.
L When the handset has been registered successfully, w stops
flashing.
L If w is still flashing, start again from step 1.
Changing the handset PIN
1 {j/OK}
2 {v}/{e}: “SETTING HS” i {>}
3 {v}/{e}: “OTHER OPT” i {>}
4 {v}/{e}: “HSPIN CHANGE” i {>}
5 {*}{7}{0}{0}{0}
6 Enter the new 4-digit handset PIN.
7 Enter the new 4-digit handset PIN again.
8 {ih}
Changing the base unit PIN
1 {j/OK}
2 {v}/{e}: “SETTING BS” i {>}
3 {5}
4 {*}{7}{0}{0}{0}
5 Enter the new 4-digit base unit PIN.
6 Enter the new 4-digit base unit PIN again.
7 {ih}
Specifications
■ Standard:
DECT (Digital Enhanced Cordless Telecommunications)
■ Number of channels: 120 Duplex Channels
■ Frequency range: 1.88 GHz to 1.90 GHz
■ Duplex procedure:
TDMA (Time Division Multiple Access)
■ Channel spacing: 1,728 kHz
■ Bit rate: 1,152 kbit/s
■ Modulation:
GFSK (Gaussian Frequency Shift Keying)
■ RF transmission power:
Approx. 10 mW (average power per channel)
■ Voice coding: ADPCM 32 kbit/s
■ Power source:
220–240 V AC, 50/60 Hz
■ Power consumption:
Base unit:
Standby: Approx. 2.1 W
Maximum: Approx. 5.7 W
Charger
*1
:
Standby: Approx. 1.1 W
Maximum: Approx. 5.2 W
■ Operating conditions:
5 °C–40 °C, 20 %–80 % relative air humidity (dry)
■ Dimensions:
Base unit: Approx. 103 mm × 104 mm × 58 mm
Handset: Approx. 148 mm × 50 mm × 33 mm
Charger: Approx. 87 mm × 75 mm × 53 mm
TG1311_1312_1313BX(e).book Page 21 Tuesday, September 2, 2008 10:36 AM