Filter
Top Products
12
Useful Telephone Settings
One touch dialling (Hot key)
Assigning an entry in the phonebook to a one touch dial key
Dial keys {1} to {9} can each be used as a one touch dial key, allowing you
to dial a number from the phonebook by simply pressing a dial key.
1 {k} i {v}/{e}: Select the desired entry. i {j/OK}
2 {v}/{e}: “HOT KEY REG” i {>}
3 {v}/{e}: Select the desired dial key. i {>}
L If the dial key is already assigned as a one touch dial key, the
displayed number flashes.
4 {v}/{e}: “YES” i {>} i {ih}
Making calls/cancelling a one touch dial assignment
1 Press and hold the desired one touch dial key ({1} to {9}).
2 ■ Making calls:
{C}
■ Cancelling a one touch dial assignment:
{>} 2 times i {v}/{e}: “YES” i {>} i {ih}
Useful Telephone Settings
Guide to handset settings
To customise the handset (general approach):
1 {j/OK}
2 Press {v} or {e} to select “SETTING HS”. i {>}
3 Press {v} or {e} to select the desired item in the handset settings
menu. i {>}
4 Press {v} or {e} to select the desired item in the sub-menu. i {>}
5 Press {v} or {e} to select the desired setting. i {>}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {ih}.
Note:
L In the following table, < > indicates the default settings.
Menu Sub-menu Page
TIME ALARM SET TIME 13
SET ALARM <OFF>—
RINGER OPT RINGER VOL <level 6>—
EXT RINGER
*1
<RING TYPE 1>—
INT RINGER <RING TYPE 1>—
PAGING <RING TYPE 1>—
ALARM <RING TYPE 1>—
TONE OPT KEY TONE <ON>—
CALL WAITING <ON>—
RANGE ALARM <OFF>—
BATTERY LOW <ON>—
TG1311_1312_1313BX(e).book Page 12 Tuesday, September 2, 2008 10:36 AM