Filter
Top Products
Useful Telephone Settings
14
Changing the handset PIN
For security, the handset PIN must be entered when changing certain
settings. If you change the PIN, please write down your new PIN as the unit
will not reveal it to you again.
1 {j/OK}
2 {v}/{e}: “SETTING HS” i {>}
3 {v}/{e}: “OTHER OPT” i {>}
4 {v}/{e}: “HSPIN CHANGE” i {>}
5 Enter the current 4-digit handset PIN.
L If you forget your PIN, see page 21.
6 Enter the new 4-digit handset PIN.
7 Enter the new 4-digit handset PIN again. i {ih}
Resetting the handset
1 {j/OK}
2 {v}/{e}: “SETTING HS” i {>}
3 {v}/{e}: “RESET HS” i {>}
4 Enter handset PIN (default: “0000”).
L If you forget your PIN, see page 21.
5 {v}/{e}: “YES” i {>} i {ih}
Guide to base unit settings
To customise the base unit (general approach):
1 {j/OK}
2 Press {v} or {e} to select “SETTING BS”. i {>}
L “INPUT CODE” is displayed.
3 Enter the desired code number. Follow the instructions in the “Feature”
column of the chart.
L To exit the operation, press {ih}.
Code No. Feature (default setting)
{0} Reset base unit to its default settings.
*1
− Enter base unit PIN (default: “0000”).
*2
i {>}
{3} Dialling mode (Tone): page 9
Recall/flash time (600 ms)
*3
− Enter base unit PIN (default: “0000”).
*2
i {2} i
{1}
− Select the desired setting by pressing {1} for 100 ms,
{2} for 600 ms or {3} for 300 ms. i {>}
DTMF mode (Off): page 16
{5} Change base unit PIN (“0000”).
*4
− Enter the current 4-digit base unit PIN.
*2
− Enter the new 4-digit base unit PIN.
− Enter the new 4-digit base unit PIN again.
TG1311_1312_1313BX(e).book Page 14 Tuesday, September 2, 2008 10:36 AM