Filter
Top Products
3.1 Customising Your Phone (Personal Programming)
162 User Manual
3.1.3 Customising the Buttons
You can change the flexible CO buttons/DSS buttons, and programmable feature (PF) buttons on
PTs, DSS Consoles, Add-on Key Modules, and PSs to the following feature buttons. For example, if
your telephone has more CO buttons than available outside lines, you may change unused CO
buttons to one touch buttons.
• To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.
Buttons
Programmable
Button
Programming Input
CO DSS PF
Loop-CO (L-CO)
Group-CO (G-CO)
+ Outside line group no. (2 digits)
Single-CO (S-CO)
+ Outside line no. (3 digits)
Direct Station Selection (DSS)
+ Extension no.
One-touch Dialling*
1
+ Desired no. (max. 32 digits)
Incoming Call Distribution
Group (ICD Group)
+ Incoming call distribution group
extension no.
Message
Message for another extension
+ Extension no./Incoming call
distribution group extension no.
Call Forwarding (FWD)/Do Not
Disturb (DND)—Both calls
FWD/DND—Outside calls
FWD/DND—Intercom calls
Press
PROGRAM
or
PAUSE
.
Press
PROGRAM
or
PAUSE
.
Press
CO
,
DSS
or
PF
.
To exit
To programme
To enter the programming mode
Follow
programming input
.
To continue
(CO, DSS, PF)
programming
input
OR
PROGRAM
PAUSE
OR
PROGRAM
PAUSE
Press
ENTER
or
STORE
.
OR
AUTO DIAL
STORE
#
0
1
2
*
²
3 0
4 0
4 0
4 1
4 2
4 3