Filter
Top Products
1.11 Using a Display Proprietary Telephone
128 User Manual
Calling with the Outgoing Call Log
You can redial using the outgoing call log.
To call
To call with the REDIAL button
• The Call Log button light shows the current status as follows:
Off: No incoming call. Or you have already viewed the call log.
Red on: You have missed calls to view.
• If your call is answered by another extension, the caller’s information is recorded on the
displays of both your extension and the answering extension.
• You can lock your call log by using an extension PIN (Personal Identification Number), so
that you can prohibit access to your logged information. Refer to "3.1.2 Settings on the
Programming Mode".
• You can also have a Call Log button for an ICD Group (Incoming Call Distribution Group).
• If a call arrives while you are using the call log, the call log display will be replaced with the
caller’s information.
Customising Your Phone
3.1.3 Customising the Buttons
Create or edit a Call Log button or Call Log for ICD Group button.
• * System programming is required for this operation. Consult your dealer.
• This operation is available only for digital proprietary telephones with a display.
T7600
Press
Left
.
Press
Up
or
Down
until
desired number
appears.
Off-hook.
While on-hook
Display PT
Press
REDIAL
to
display the outgoing
call log.*
Press
REDIAL
until
desired number
appears.
Off-hook.
While on-hook
REDIAL
REDIAL