Filter
Top Products
3.1 Customising Your Phone (Personal Programming)
152 User Manual
3.1.2 Settings on the Programming Mode
You can programme features using the programming mode.
Setting Features
The default settings are shown in bold letters. For later reference, place a check mark in the boxes
below to indicate your customised setting.
Notice
The default value may vary depending on country/area. For more details, consult your dealer.
— Setting Features
— Clearing Features
• To exit at any time, lift the handset.
• To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.
Item
Programming
Input
Selection & Parameter
Your extension information
PT: The display shows the PBX number, slot number
and port number.
<example>
PS: The display shows the PS number.
<example>
Preferred display contrast
level from the 4 levels
available.
(Display Contrast
Selection)*
1
Light
Little Light
Little Dark
Dark
Follow
programming
input.
To programme To exit
To enter the programming mode
Follow Selection
& Parameter.
Press PROGRAM
or PAUSE.
Press PROGRAM
or PAUSE.
selection &
parameter
programming
input
OR
PROGRAM
PAUSE
OR
PROGRAM
PAUSE
Press ENTER
or STORE.
OR
AUTO DIAL
STORE
Press ENTER
or STORE.
OR
AUTO DIAL
STORE
0 0
EXT1050:10308
PBX no. Port no
.
Slot no.
EXT3001:99001
PS no.
0 1
1
2
3
4