Filter
Top Products
APPENDIX
374 User Manual
Conditions
• If the displayed characters exceed sixteen digits, "&" is shown at the right-hand edge.
• The duration time display is only shown when you make or receive an outside call. Count
start time for outgoing calls can be programmed as desired.
• When you confirm key programming, be sure to press a button while on-hook. If the "Full
One-Touch Dialing" feature is set, dialing mode will start when pressing PF (Programmable
Feature), DSS (Direct Station Selection), SAVE or REDIAL button.
Loop-CO BOUCLE DE LR Loop-CO (L-CO) button is assigned.
Message Waiting MESS. EN ATTENTE Message Waiting (MESSAGE) button is
assigned.
NIGNT NUIT Night button is assigned.
Not Stored NON MEMORISE No programming is assigned.
Pref.In :CO-02 ENT.PREF:LR-02 Select "Prime Line (Outside Line) Preference
— Incoming".
Pref.In :NO ENT.PREF:NON Select "No Line Preference — Incoming".
Pref.In :Ring ENT.PREF:SONN Select "Ring Line Preference — Incoming".
Pref.Out:CO-02 SOR.PREF:LR-02 Select "Prime Line (Outside Line) Preference
— Outgoing".
Pref.Out:ICM SOR.PREF:INTCM Select "Prime Line (INTERCOM) Preference
— Outgoing".
Pref.Out:Idle SOR.PREF:LIB. Select "Idle Line Preference — Outgoing".
Pref.Out:No SOR.PREF:NON Select "No Line Preference — Outgoing".
Save SAUVEGARDE SAVE button is assigned.
Tone Call APPEL-TON. Select Ring-Calling mode.
Tone Type-2 TON. TYPE-2 Select ringing tone for a CO button or
intercom calls.
TRK GRP-3 GR LR-3 Group-CO (G-CO) button is assigned.
VTR-101 TMV-101 Voice Mail (VM) Transfer button is assigned.
Voice Call APPEL VOCAL Select Voice-Calling mode.
092-555-2111 092-555-2111 One-Touch Dialing button is assigned.
English Display French Display Description