Filter
Top Products
Answering System Features (KX-TCD580 only)
40
5 Select the desired setting, then press
,.
6 Press {ih}.
Selecting the caller’s recording
time
You can change the maximum message
recording time allotted to each caller, or set
the unit to greet callers but not record
messages.
“1 Minute”: Caller messages are limited to
1 minute.
“No Limit”: Caller messages are limited
only by the amount of total recording time
available in the answering system.
“Greeting Only”: The unit plays the
greeting message but does not record caller
messages.
1 Press $ (centre of joystick).
2 Select K, then press ,.
3 Select “Setting TAM”, then press
,.
4 Select “Msg Rec Time”, then press
,.
5 Select the desired setting, then press
,.
6 Press {ih}.
Turning the greeting monitor
on/off
You can select whether the greeting
message is heard through the unit’s speaker
when the unit answers a call.
1 Press $ (centre of joystick).
2 Select K, then press ,.
3 Select “Setting TAM”, then press
,.
4 Select “Greet Monitor”, then press
,.
5 Select “On” or “Off”, then press ,.
6 Press {ih}.
Note:
L If set to “Off”, only the caller message
will be heard through the speaker.
KX-TCD560-580NZ(e).book Page 40 Tuesday, July 6, 2004 10:49 AM