Filter
Top Products
Useful Telephone Settings
29
Base unit settings
Adjusting ringer volume
1
Press $ (centre of joystick).
2 Select u, then press ,.
3 Enter “0000” (default base unit PIN).
L If you changed the PIN, enter it (page
30).
4 Press , 2 times.
5 Push the joystick up or down repeatedly
to select the desired volume.
6 Press ,.
7 Press {ih}.
Call Options
Changing the recall mode
Change the recall mode, if necessary,
depending on the requirements of your
service provider or PBX.
“Type 1”: 100 ms
“Type 2”: 600 ms
“Type 3”: 200 ms
1 Press $ (centre of joystick).
2 Select u, then press ,.
3 Enter “0000” (default base unit PIN).
L If you changed the PIN, enter it (page
30).
4 Select “Call Option”, then press
,.
5 Select “Recall”, then press ,.
6 Select the desired setting, then press
,.
7 Press {ih}.
Setting pause length
Change the pause length, if necessary,
depending on the requirements of your
service provider or PBX.
“Short”: 3 sec.
“Long”: 5 sec.
1 Press $ (centre of joystick).
2 Select u, then press ,.
3 Enter “0000” (default base unit PIN).
L If you changed the PIN, enter it (page
30).
4 Select “Call Option”, then press
,.
5 Select “Pause Time”, then press
,.
6 Select the desired setting, then press
,.
7 Press {ih}.
Storing/changing emergency numbers
These settings determine which phone
numbers can be dialled while the call bar
feature is on (page 25).
1 Press $ (centre of joystick).
2 Select u, then press ,.
3 Enter “0000” (default base unit PIN).
L If you changed the PIN, enter it (page
30).
4 Select “Call Option”, then press
,.
5 Select “Emergency Call”, then press
,.
6 Select a memory location, then press
,.
L If the memory location already
contains an emergency number, the
number is displayed.
7 Enter/edit the number, then press ,.
8 Press {ih}.
Note:
L The default setting for emergency
numbers are stored in the first 3 memory
locations. It is recommended that you do
not overwrite these numbers.
KX-TCD560-580NZ(e).book Page 29 Tuesday, July 6, 2004 10:49 AM