Filter
Top Products
Telephone
12
Making calls
1 Lift the handset and dial the phone
number.
L To correct a digit, press {C}, then
enter the correct number.
2 Press {C}.
3 When finished talking, press {ih} or
place the handset on the charger.
Speakerphone
The handset features a digital
speakerphone, which allows you to have
hands-free conversations. Press {s} to turn
on the speakerphone during a conversation.
Press {C} to switch back to the receiver.
L “Speaker Phone” is displayed while the
speakerphone is turned on.
L For best performance, please note the
following:
– Use the speakerphone in a quiet
environment.
– Speak alternately with the caller.
– If you or the other party have difficulty
hearing each other, push the joystick up
or down repeatedly to adjust the
speaker volume as necessary.
To adjust the receiver or speaker volume
Push the joystick up or down while talking. 3
volume levels are available for the receiver.
6 levels are available for the speaker.
Redial feature
Previously dialled phone numbers (each 24
digits max.) can be redialled.
To redial the last number dialled
Press - (soft key), then press {C} or
{s}.
To redial automatically
Redial by pressing {s} then - (soft key)
if you want the unit to redial the phone
number again automatically if the other
party’s line is engaged. The unit will redial up
to 10 times. While the handset is waiting to
redial, the ringer indicator will flash. While
the handset is redialling, mute is
automatically turned on.
Note:
L If mute does not turn off after the line is
connected, press ^.
To make a call using the redial list
The last 10 phone numbers dialled are
stored in the redial list.
1 Press - (soft key).
L The last number dialled will be
displayed.
2 Push the joystick up or down repeatedly
to select the desired number.
L To exit the list, press {ih}.
3 Press {C} or {s}.
To edit a number in the redial list before
calling it
1 Press - (soft key).
2 Push the joystick up or down repeatedly
to select the desired number, then press
*.
3 Select “Edit for Call”, then press
,.
L The first digit of the number will flash.
4 Use the joystick to move the cursor, then
edit the number.
L Place the cursor on the number you
wish to erase, then press {C}.
L Place the cursor to the right of where
you want to insert a number, then
press the appropriate dial key.
5 Press {C}, {s}, or , to call.
KX-TCD560-580NZ(e).book Page 12 Tuesday, July 6, 2004 10:49 AM