Filter
Top Products
Useful Telephone Settings
30
Selecting area codes to be deleted
automatically
In some situations, phone numbers stored
automatically in the Caller ID list (page 33)
will include area codes. If you do not want to
dial the area codes when making calls from
the Caller ID list, you can store the area
codes which you want the unit to delete
automatically.
Example: You have stored the area code
“123”. If you make a call from the Caller ID
list to the phone number “123-456-7890”,
the unit dials “456-7890”.
1 Press $ (centre of joystick).
2 Select u, then press ,.
3 Enter “0000” (default base unit PIN).
L If you changed the PIN, enter it (page
30).
4 Select “Call Option”, then press
,.
5 Select “Set ARS”, then press ,.
6 Select “Set Area Code”, then press
,.
7 Select an area code location (1-25),
then press ,.
L If the location already contains an
area code, the code is displayed.
8 Enter an area code (5 digits max.), then
press ,.
9 Press {ih}.
Note:
L The use of this feature can prevent a
National Call from being dialled. E.g., in
the case of the South Island, the “03” will
be omitted and will therefore prevent a
National Call to other areas of the South
Island.
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up
to 6 phone numbers to be restricted, and
select which handsets will be restricted.
Storing area codes here will prevent the
restricted handsets from dialling any phone
number in that area code. If a restricted
number is dialled, the call will not be
connected and the restricted number will
flash on the display.
1 Press $ (centre of joystick).
2 Select u, then press ,.
3 Enter “0000” (default base unit PIN).
L If you changed the PIN, enter it (page
30).
4 Select “Call Option”, then press
,.
5 Select “Call Restricted”, then
press ,.
6 Set which handsets will be restricted by
selecting the handset then pressing
?.
L Restricted handsets have a Q next to
them.
L To turn call restriction off for a
handset, select the restricted handset,
then press ?.
7 Press ,.
8 Select a memory location, then press
,.
L Previously stored phone numbers are
displayed.
9 Enter the phone number or area code to
be restricted (8 digits max.), then press
,.
L To erase a restricted number, press
{C}.
10 Press {ih}.
Other options
Changing the base unit PIN (personal
identification number)
For security, the base unit PIN must be
entered when changing certain settings. The
default PIN is “0000”.
KX-TCD560-580NZ(e).book Page 30 Tuesday, July 6, 2004 10:49 AM