Filter
Top Products
Multi-unit Operation
50
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Note:
L If handset 2 (the receiver) did not prepare
for copying, “Copy Failure” will be
displayed on handset 1 (the sender).
L If phonebook memory is full on handset 2
(the receiver), “Copy Incomplete” will
be displayed on handset 1 (the sender).
Transferring calls
between handsets,
conference calls
Outside calls can be transferred between 2
handsets in the same radio cell. 2 handsets
in the same radio cell can have a conference
call with an outside party.
Example: When handset 1 transfers a call
to handset 2
1 Handset 1:
During an outside call, press {INT} and
{2} (desired handset number).
L If there is no answer, press {INT} to
return to the outside call.
2 Handset 2:
Press {C} or {s} to answer the page.
L Handset 2 can talk with handset 1.
L The outside call will be put on hold.
3 Handset 1:
To complete the call transfer, press
{ih}.
To establish a conference call, press
{3}.
Transferring a call without speaking to
the other handset user
1 During an outside call, press {INT}, then
press the desired handset number.
L The other handset rings if it is within
range of the base unit and turned on.
2 Press {ih}.
L The outside call rings at the other
handset.
Note:
L k flashes to indicate the outside call is on
hold.
L If the other handset user does not answer
the call within 1 minute, the call will ring at
your handset again.