Preparation
11
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Note:
L Actual battery performance depends on a
combination of how often the handset is in
use (talking) and how often it is not in use
(standby).
L Battery operating time may be shortened
over time depending on usage conditions
and ambient temperature.
Battery replacement
If 7 flashes even when the handset
battery has been fully charged, the battery
must be replaced.
Important:
L Please use only the Panasonic battery
noted on page 3.
L Use only a rechargeable battery. If you
install a non-rechargeable battery and
start charging, the battery may leak
electrolyte.
1 Press the notch on the cover firmly and
slide it in the direction of the arrow.
2 Remove the old battery and install the
new one. See page 10 for battery
installation.
Turning the power on/off
Power on
Press {ih} for about 1 second.
LThe display will change to the standby
mode.
Power off
Press {ih} for about 2 seconds.
LThe display will go blank.
Setting the date and time
Important:
L Confirm that the AC adaptors are
connected.
L Ensure that w is not flashing.
1 Press $ (centre of joystick).
2 Select t, then press , 2 times.
3 Enter the current day, month and year by
selecting 2 digits for each.
Example: 17 May, 2004
Press {1}{7}{0}{5}{0}{4}.
L If you make a mistake, use the joystick
to move the cursor, then make the
correction.
4 Enter the current hour and minute by
selecting 2 digits for each.
5 Press / repeatedly to select 12- or
24-hour time entry.
L 24-hour time entry is selected when
neither “AM” nor “PM” are displayed.
Example: 3:30 PM
Press {0}{3}{3}{0}, then press /
repeatedly until “03:30 PM” is
displayed.
6 Press ,.
7 Press {ih}.
Operation Operating time
While in use (talking) 17 hours max.
While not in use
(standby)
270 hours max.