Filter
Top Products
Optional Telephone Services
38
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
“Writing and sending a new message”,
page 36.
Erasing a received message
1
While reading a received message,
press * (centre of joystick).
2 Select “Delete”, then press ,.
3 Select “Yes”, then press ,.
4 Press {ih}.
Storing the sender’s number in
the handset phonebook
1
While reading a received message,
press * (centre of joystick).
2 Select “Save Phonebook”, then press
,.
3 Continue from step 2, “Adding entries to
the handset phonebook”, page 16.
Editing the sender’s number
before calling back
1
While reading a received message,
press * (centre of joystick).
2 Select “Edit for Call”, then press
,.
3 Edit the number, then press {C}, {s},
or , to call.
Guide to SMS settings
If the base unit is reset to its default settings
(page 32), the following SMS-related
settings will be reset.
Note:
L If the base unit is reset to its default
settings, the contents of the receive and
send lists will be erased.
Turning SMS on/off
1
Press $ (centre of joystick).
2 Select }, then press ,.
3 Select “Parameters”, then press ,.
4 Enter “0000” (default base unit PIN).
L If you changed the PIN, enter it (page
32).
5 Select “SMS On/Off”, then press ,.
6 Select “On” or “Off”, then press ,.
7 Press {ih}.
Note:
L If you try to send a message while SMS is
turned off, a tone sounds and the
message is placed in the receive list with
“FD” attached to it.
L If someone tries to send you a message
while SMS is turned off, the message will
not be received and the message centre
number will be logged in the Caller ID list.
SMS settings Default
setting
Page
SMS on/off On page 38
Message
Centre 1
1470PP1
7094009
page 39
Message
Centre 2
0800587
529
page 39
PBX line
access number
Off page 39