Filter
Top Products
Multi-unit Operation
49
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
will allow the base unit to “forget” the
handset.
1 Press $ (centre of joystick).
2 Select u, then press ,.
3 Enter “0000” (default base unit PIN).
L If you changed the PIN, enter it (page
32).
4 Enter “226235”.
5 Select “Cancel Handset”, then press
,.
L The names of all handsets registered
to the base unit are displayed.
6 Select the handset(s) you want to
cancel, press ?, then press ,.
Cancelling a base unit
A handset can be registered to a maximum
of 4 base units. A handset can cancel a base
unit that it is registered to. This allows the
handset to “forget” the base unit.
1 Press $ (centre of joystick).
2 Select t, then press ,.
3 Select “Registration”, then press
,.
4 Enter “226235”.
5 Select “Cancel Base”, then press
,.
6 Enter “0000” (default handset PIN).
L If you changed the PIN, enter it (page
28).
7 Select the base unit(s) you want to
cancel, press ?, then press ,.
8 Select “Yes”, then press ,.
9 Press {ih}.
Note:
L To register the handset to another base
unit or to the same base unit again, see
page 48.
Intercom between
handsets
Example: When handset 1 calls handset 2
1 Handset 1:
Press {INT} and {2} (desired handset
number).
2 Handset 2:
Press {C} or {s} to answer.
3 When finished talking, press {ih}.
Note:
L Intercom calls can be made between
handsets in the same radio cell, but not
between handsets in different radio cells.
Copying handset
phonebook entries to
other handsets
Phonebook entries (page 16) can be copied
from the handset to the phonebook of a
compatible Panasonic handset.
Example: When handset 1 is sending
phonebook entries to handset 2
1 Establish an intercom call (page 49).
2 Handset 2:
Press * (centre of joystick), select
“Recv Phonebook”, then press ,.
3 Handset 1:
Press *, select “Send
Phonebook”, then press ,.
4 Handset 1:
Push the joystick up or down repeatedly
to select the desired entry and/or press
,.
5 Handset 1:
Select “Copy One Item” or “Copy All
Items”, then press ,.