Panasonic KX-TCD420AL Answering Machine User Manual


 
47
Technical Information
Specifications:
Specifications are subject to change.
The illustrations used in this manual may differ slightly from the original device.
Connections:
The unit will not work during a power failure. We recommend you connect a standard
telephone on the same line for power protection.
Standard: DECT=(D
igital Enhanced Cordless
T
elecommunications)
GAP=(Generic Access Profile)
Number of channels: 120 Duplex Channels
Frequency range:
1.88 GHz to 1.9 GHz
Duplex procedure: TDMA (Time Division Multiple Access)
Channel spacing: 1728 kHz
Bit rate:
1152 kbit/s
Modulation:
GFSK
RF Transmission Power: Approx. 250 mW
Voice coding:
ADPCM 32 kbit/s
Power source: AC Adaptor 220 - 240 V, 50 Hz
Power consumption, base unit: Standby: Approx. 3.5 W
Maximum: Approx. 9.2 W
Operating conditions: 5 - 40 °C, 20 - 80 % relative air humidity (dry)
Dimensions, Base Unit: About (58 mm x 128 mm x 105 mm) x 170 g
Dimensions, Handset:
About (143 mm x 48 mm x 32 mm) x 120
g
Useful Information
420AL_e_04.fm Page 47 Thursday, July 10, 2003 7:02 PM