Filter
Top Products
25
Cordless Telephone
Handset Settings
Setting the Direct Call Number
After a direct call number has been set and on, you can dial the direct call number only
by pressing TALK. Incoming calls are accepted.
Setting the Direct Call On/Off
• To exit the operation, press any time.
*1 If "ON" is selected, is displayed.
: Other Options
Changing Handset PIN
The factory preset is 0000. Once you have programmed the handset PIN, you
cannot confirm it. We recommend you write down the handset PIN. If you forget
it, please consult your nearest Panasonic Service Centre.
• To exit the operation, press any time.
Before programming, please follow steps 1 to 3.
Press MENU. Search/Select
"CALL OPT".
Search/Select
"SETTING HS".
12 3
Search/Select
"DIRECT NO".
Phone Number
Enter the direct
call number. (max. 24 digits)
Press OK 3 times.*1
45 6
Search/Select
"SET DIRECT".
Search/Select
"ON" or "OFF".*1
45
Current 4-digit Handset PIN
Search/Select
"HSPIN CHANGE".
New 4-digit Handset PIN
New 4-digit Handset PIN again to verify
4
6
7
5
Press MENU. Search/Select
"OTHER OPT".
Search/Select
"SETTING HS".
12 3
TCD420AL_e.book Page 25 Tuesday, July 1, 2003 11:16 AM